Spyderco Counterfeits, Clones, Replicas, etc. A place to list and reference all Spyderco counterfeits, clones, and replicas that are found. Anything that isn't a legitimate Spyderco fits in this area.
Enter the 2025 Spyderco Forum Calendar Contest today! Please read this entire announcement before entering. Several submissions were disqualified in years past because of missed details. Seriously, please read carefully.
Announcing the 2024 OpFocus Factory Seconds Sale!
Sunday, June 23rd, 2024, 9 am - 3 pm (MDT)
This is an opportunity for qualified personnel to purchase Spyderco factory seconds, closeout items, and other select products at incredible discounts,...
There has been some discussion and fair amount of frustration on the question of Spyderco choosing not to ship internal parts. The subject is far more complicated than it might appear on the surface. Some of the questions that...
This forum has some of the most kindhearted people that I have ever met . So many of you are always willing to help someone in need. It is for that reason that I felt I had to post this.
Recently there was someone who posted about challenges they were...
SE are the bees knees and you need to get with the program. Just as with PE knives, not all SE knives are created equally and different combinations perform better than others. Towards the end there's a bit of why I'm bothering with all this if...
I’d like to thank all of you for the great information on the issue mentioned. My primary purpose for the thread was more to raise awareness that it is a problem and hope that just the greater awareness would help contribute...
So... like a lot of people I pulled the trigger on the Native Chief LW in the recent MAPnesty sale in April. I had wanted a Native Chief forever. In the interim I bought and sold at least one Native 5 LW . Some of the things I didn't like about that knife...
I thought the Titanium Tenacious was coming out in D2. In the reveal the steel reads, 8cr13mov.
I have no D2 in my collection, other than 1 junk D2, and I was hoping to get some D2 that I can believe in. Sure, I like the Spyderco treatment of 8cr13mov...
My nephew is graduating from high school and I would like to add to his knife collection with something personalized with his name or initials. His collection consists mostly of old knives that were my dads and grandfathers...
Every week I see some really great pics on this forum so I thought we could have a weekly competition. The competition will last from Monday to Sunday and the winner and runner up will be announced on Sunday evening. The winner will be the judge for the...
I'm surprised but please to see PD#1 come back. I still remember how when people were wanting cruwear everything PD#1 mules were available for a long time. Does PD#1 offer any real difference from cruwear or is it like M390 compared to CTS 204P and 20CV?
Well, I feel like a little kid right now just waiting for Santa, in this case the Mail person. I am waiting on 3 Spydercos: a Delica super blue, Cat G10, and Pacific salt spyderedge. What's in the mail on your side of the woods?
I literally picked this knife up at a Woodworking Show many years ago. It was laying in a vendor's items and I picked it up and tried to give it to the vendor. He wouldn't have that, so I gave him my contact info and asked that if there were any inquiries...
I stripped the heads of my pivot screws on my Manix 2. Will Spyderco's warranty department send me replacements? I am also wondering about just sending the knife in since the whole reason I stripped the screws is because I was trying to get the...
With all of the new salts coming out I can’t help but imagine what a Pacific Salt 3 could look like… maybe it can have Black and Green scales like the Magnacut Pm2 or Caribbean but with a Magnacut blade.
For all of you who are smarter than me, what can we surmise based on Spyderco's analysis of VG XEOS. I realize that Spyderco is not 100% confident the numbers they posted, so we need to take the chart below with a grain of salt. I'm sure that heat treat...
Does Spyderco only make tanto blades in limited runs for “Distributor Exclusives”? I want a black one. Are they all DLC, or are there any TCN? Black Cruwear or Magnacut would be nice. Maybe black micarta scales, but I’m not sure about that.
Like, I get it, there's really great enthusiasm for this really great new steel.
If we look at it from a numbers-only point of view ( source ) we can see that the steel offers *amazing* corrosion resistance with *good* toughness, and *average* edge...
It's all the Cricket's fault, that handy little hook at the front of the blade got me thinking about how i use knives daily, mostly to open packaging and boxes, the Cricket made short work of clamshell packaging, antistatic bags, the packing tape seal on...
That Spymyto is a sweet looking knife. Wonder when it will be released? Also pricing, hope it's more in the Swayback pricing range and not the Paysan...
This one has Sal written all over it ! Sal's design + lock + steel. The mighty Millie 2 in SPY27. I am going to purchase at least two of them !!! Can't wait ! :bug-red-white
What a wonderful surprise seeing the G10 Manix finally getting a Spy-27 version! Great job Spyderco now i have 4 spydies i need to save up for this year! Thank god releases in Europe always come later on! :squinting-tongue
I’ve been waiting for the day this was announced. I have every variant of the stretch 2 xl (including nishijin) and the lightweight is a marvel of knife design. In K390, it has the potential to be a top 5 all time carry for me personally. I knew this day...
I like the Chaparral, quite a lot. It is super thin and gives more blade than the Dragonfly in almost the same size package. I personally would like to see a Chaparral slip joint with SPY27.
I think it is time to move on from XHP as I like SPY27 better...
Sal, any update on the PM2 Bowie? I am looking everyday for a hint or update. Will it be launched this year? Any steels besides sv30/45 that will be utilized for this launch? Will this be a sprint run only to judge consumer demand?
MIf you need a test...
To kick off this thread, I'm going to use 10V from the rivers edge run on the pm2. I tested the more recent Para 3 and it matched the pm2 in terms of wear resistance. The 10V runs have been compared to the bento...
I’ve been using my mint green M4 coated delica for a while and love the coating on it, it doesn’t flake even with abuse and has is nearly as easy to care for as stainless. It’s really fantastic wish I saw more seki tool steel spydercos with it.
With the implementation of the Endela, the Endura family got a middle ground model sized between Endura and Delica (though as a matter of fact closer to the Endura than the Delica)
I think it would be great if in the (backlock) Salt line the gap between...
Now this is a cool little knife! And dressed in those elegant wooden scales it has ‘gentleman’ written all over it. I hope the spring has some good tension to it. I may need one.
I usually touch on this subject at least once a year. And we've gotten some really interesting results as to the models that folks would love to have in FULL SE. After all Spyderco really made their name and put themselves on the map by producing arguably...
One Spyderco model that I cut my teeth on in the late 90s/early 2000s was my beloved C-44 Dyad(The Bigger one). I immediately feel in love with the concept of having a full SE and a full PE blade in one folder. Even the smaller Dyad Junior I found great...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum