DAYWALKER Design. Pictures! (Non-Spyderco)

[pjrocco]

Greetings,

I just got my hands on DAYWALKER's design. I have to say, i am very pleased with this design, although it is not Spyderco, it is still top notch! If you have a chance to pick one of these little folders up, please do! DAYWALKER can for sure design a great knife.

Boker/Magnum BO589

Thanks Chad!

Here are some pics of it,

Enjoy!

http://img445.imageshack.us/img445/4783/banos48iq.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/5219/banos7jb.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/8662/banos27ck.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/2583/banos34od.jpg (http://imageshack.us)

[pjrocco]

http://img445.imageshack.us/img445/6793/banos57tj.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/2990/banos69tk.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/7677/banos95km.jpg (http://imageshack.us)

http://img445.imageshack.us/img445/9931/banos993cs.jpg (http://imageshack.us)

[raven]

Rock, Awsome pix, Thanks for Sharing. Yeah, This is definately a knife I will be adding to the collection. I am very Happy for Chad, he deserved this. Great Design, especially his Logo :D :). I believe there will be more to come from him and dialex. Again, Rock thanks for sharing.

God Bless :)


-raven-

[Outlaw]

Excellent pics Rock!
I have one of these "incoming" can't wait. :D Should make an great stocking stuffer!
(for myself :o )

Congrats Chad!

[CopilotATS-55]

Ooohh I Likee :d

[spydutch]

Terrific pics Rock :cool: Thanks for sharing.

Can't wait for Chad's Spyderco design :D

[smcfalls13]

I've got one in my pocket right now :D

Solid little knife.

Thing is freakishly sharp, even for a 420 blade, and I don't know what Boker did to it, but it holds an edge well.

Thing flicks open like an auto too.

I love this knife. :D

[WORKER#9]

Sweet PICS!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[The Deacon]

Great pictures Rock!


I've got one in my pocket right now :D

Solid little knife.

Thing is freakishly sharp, even for a 420 blade, and I don't know what Boker did to it, but it holds an edge well.

Thing flicks open like an auto too.

I love this knife. :DMine won't flick open, but the action is very smooth, so it may just be a matter of technique (or more accurately, lack of same). :o Agree the out of the box sharpness was quite impressive. Find the "half moon" shaped studs provide much more reliable opening than the usual small cylindrical ones, and since there are two of them, left hand opening works quite well. Clip is admirably sturdy. Mine was quite tight and needed a bit of adjustment. However, if properly tensioned, I don't think anyone will ever complain about losing a SUBCOM when they reached past it into their pocket.

[flipe8]

When I saw it on Knife Forums, I didn't even know Chad was designing let alone having one of his designs made. I will get one for sure.

[smcfalls13]

Great pictures Rock!

Mine won't flick open, but the action is very smooth, so it may just be a matter of technique (or more accurately, lack of same). :o Agree the out of the box sharpness was quite impressive. Find the "half moon" shaped studs provide much more reliable opening than the usual small cylindrical ones, and since there are two of them, left hand opening works quite well. Clip is admirably sturdy. Mine was quite tight and needed a bit of adjustment. However, if properly tensioned, I don't think anyone will ever complain about losing a SUBCOM when they reached past it into their pocket.

Deacon, you'd be proud, I actually use this one clipless :eek:

It rides with my keys, and because of it's shape, noone recognizes it as a knife(thank you Chad). Everyone assume it's a remote car starter ;)

How's that for inconspicuous carry :cool:

Yeah, those studs are much more reliable than standard studs, and being the zytel/frn, my thumb doesn't slip off as easily as a steel stud.

Flicking it open just takes practice, and I still can't do it every time, but there is a sweet spot on the stud, that a light flick with a thumb will pop the blade open really quickly.

Overall excellent knife. :cool:

[Piet.S]

Well done Chad.

http://www.hondenhuys.nl/forumsmilies/s42.gif

[Jenner 515]

Boy howdy, that is cool like the underside of the pillow.

Nice job.

[The Deacon]

Deacon, you'd be proud, I actually use this one clipless :eek:

It rides with my keys, and because of it's shape, noone recognizes it as a knife(thank you Chad). Everyone assume it's a remote car starter ;)

How's that for inconspicuous carry :cool:

Yeah, those studs are much more reliable than standard studs, and being the zytel/frn, my thumb doesn't slip off as easily as a steel stud.

Flicking it open just takes practice, and I still can't do it every time, but there is a sweet spot on the stud, that a light flick with a thumb will pop the blade open really quickly.

Overall excellent knife. :cool:That's so funny. I've been wearing suspenders lately instead of a belt, so I repositioned the clip on mine for tip down and have been carrying it clipped on the outside of my jeans, just behind the left front pocket, in plain sight. I'm figuring folks think it's a pager or something computer related.

Far as the "flicking", I was thinking something completely different, never tried flicking the stud, :o thought you meant opening it with a flick of the wrist.

[smcfalls13]

Far as the "flicking", I was thinking something completely different, never tried flicking the stud, :o thought you meant opening it with a flick of the wrist.

No, I tried it that way, and it's possible, but very difficult. Flicking the stud is more than sufficient for me. It's a nice discrete knife, no point in advertising I have a knife with a flamboyant flick of the wrist ;)

[Outlaw]

I've got one in my pocket right now :D

Solid little knife.

Thing is freakishly sharp, even for a 420 blade, and I don't know what Boker did to it, but it holds an edge well.

Thing flicks open like an auto too.

I love this knife. :D

I guess I posted too early this morning, as this afternoon my BO 589 arrived! :D
I can attest to the freakishly sharp comment! :eek: Hair popin' sharp falls way short of describing how sharp the blade is. Freakishly sharp... that is exactly what it is!

Flicking open... well not mine, but that's OK with me. It's a little too scary to try with such a....
Freakishly Sharp Blade :)

One thing for sure, this little "biscuit" has a very secure grip. No problems there, yet it is very comfortable to hold.

Way to go Chad! :cool:

[Irish Lager]

Nice job Chad,
I love the look of it. Ill have to pick one up, if i like it enough, who knows, maybe even 2. thanks for sharing Rock.
J
Eddited to add: Does anyone know where they can be bought at? Thanks

[jaislandboy]

Cool design..Congrats Chad...where's the round hole? ;) :cool:

[Terry Trahan]

I am glad everyone likes it so far.
I love mine, and it rides with me everyday.


On an off note, it is great to see this come to fruition, as it is a great knife, but the best part was getting to know Chad.
He truly is a genuinely nice, great person.
Much congratulations are in order, you deserve them brother.

[CopilotATS-55]

i gotta get this model :D

[Rob]

Congratulations to Chad! Looks very well done. OK, no Spyderco, but it sure looks too nice to miss it :D

Now the big question: Where can I get one? I´ve checked the Böker/Magnum homepage but could not find it :confused:

Cheers, Rob

[raven]

Hello Rob, I know of 2 places to look, www.selfdefensesupply.com (may be for dealers only) and www.888knivesrus.com. Might check them out. Let us know what you find out. Take Care. ;)

God Bless :)


-raven-

[Tank]

Very cool little knife Chad, Congrats.. Cant wait to see how it feels in the hand.

Great job.

[greencobra]

As always Rock, great pics. These photos really do it justice.

And not to snub the designer....Take a bow Chad, good work my friend.

[samosaurus]

Suweeet! :cool: :D :cool:

Sam

[Jimd]

Chad, congrats, man!!!! I REALLY like that design a lot!!! Great, little "bulldog" kinda blade. I like short, wide blades like that, it elevates the stature of the short blade to unheard-of levels.

I'd definitely love to get one of those. How about a portrait of the knife, Chad? That'd be nice to hang on your wall, wouldn't it?

[Dodge]

Here I found some. I'll keep looking though...
Clik Me!! (http://www.888knivesrus.com/product/BOM589)

[Vincent]

nice pics, great knife

[zackerty]

Chad...I am going to have to think about this one for a while...
I do not like thumb studs, unless they are the Terzuola type, but I could get used to this, with a bit of time.
The handle looks ergonomic, and if the steel was an upgraded one, I could live with it in my back pocket.
I guess I am going to have to get one, and experiment with it as an EDC...

[pjrocco]

I guess I am going to have to get one, and experiment with it as an EDC...

That's for sure. Once you get one and use it for a good day... You'll appreciate the design.. :)

[Joe Talmadge]

Weird, first time I saw the pics I didn't think much of it. I'm looking at them again now and love it. It's definitely on my list. I love these little Chive-sized knives, especially when someone figures out how to make such a little knife feel good in the hand.

[dialex]

Thanks for the great pics. I love Chad's "biscuit", ;) an inspired design and a great little knife. I suspect his ITR will be even better. :cool:

[mikewww]

I tried to buy one from 888 KnivesRUs, but they do not supply to South Africa. Does anyone know of another supplier ? Unfortunately NGK do not stock this Boker model.

Mike

[pjrocco]

I tried to buy one from 888 KnivesRUs, but they do not supply to South Africa. Does anyone know of another supplier ? Unfortunately NGK do not stock this Boker model.

Mike

Hey Mike,

You might want to give Boker a call directly...

Call 1-800-992-6537, and ask for model number BO589.

Hope this helps. :)

[224477]

Guys, I ENVY you.
Congrats Chad!

[Hannibal Lecter]

Dear Friends,

I am only today in receipt of a Boker SubCom Folder and am truly amazed. In fairness, it did require a few licks from a Sharpmaker to bring it to a razor's edge...

Compact design, light weight, good balance, and very unobtrusive in the pocket.

Ever since my Dear Lady Lecter absconded with my stainless Cricket PE, I have been needing a replacement for it and the SubCom will suffice nicely.

This little knife is a must-have. Good show, Chad. My sincerest thanks to you!

--------
Hannibal

[Irish Lager]

finally got to hold one. When i met w/ Ghostrider today, he had a few new toys to show me. In truth when i first looked at the design i thought it was much larger and therefore was quite harsh in my opinions. After handling this little knife i can say that it holds its own. I love the size and shape, and with the addition of a fob it fits the hand as well as any large folder. Great job Chad. Thanks to Ghostrider, now i have to buy 1 or 2.
J

[WORKER#9]

I happened on to one today! ;) This is one great design. I can't wait to start using it! My wife tried to take it when I showed her! But this one is special, Chads first production knife. Thanks Chad!!

If you don't have one already get one!!! :D

[ghostrider]

finally got to hold one. When i met w/ Ghostrider today, he had a few new toys to show me. In truth when i first looked at the design i thought it was much larger and therefore was quite harsh in my opinions. After handling this little knife i can say that it holds its own. I love the size and shape, and with the addition of a fob it fits the hand as well as any large folder. Great job Chad. Thanks to Ghostrider, now i have to buy 1 or 2.
JOh you know me. Anything I can do to help… in your adiction that is :D .

[DAYWALKER]

Aloha ALL,

Whoa! Okay, first of all, you all know where I am when I do not post or thread so it is obvious as to "where I have been as of late" and not by choice either :mad: .

Normally, I at least try to do a quick scan of my emails and check in on my "second home" (here) but I have just been coming home from Hell and trying to catch up missed family time...oh, and sleep is something I have forgotten about lately because I don't have time to do it. :(

ANYWAY...I don't know what to say right now to all the replies to this post that KnifeBro the Rock has started! Thank you Rock for the great pics, and thank you to everyone else for their kind words towards my SUBCOM Folder design.

I still feel "funny" talking about it here, regardless of this place being OT, so I just want to again say, from my heart and FWIW:

MAHALO

NOW...be advised guys...when my :spyder: model is unleashed...top of the line ALL the way and it will be a design I can speak freely about here at "home"! :) Oh and uh, you guys will LUV it! (I hope :o )

To those of you who have an SF, you are in fact holding "tangible proof" of an "Application of Faith in Motion" :D IF you are not a believer in the Lord, that's fine, and I thank you just the same. ;) Thank you too Sal if you are reading this, for your understanding and patience. ;)

Got a lot of catching up to do here and cripes, feels like I gotta catch up in everywhere and in everything! Take care my :spyder: Brethren, and God bless :cool:

[Hannibal Lecter]

My Dear Daywalker,

So when is the hawkbill version of the SUBCOM coming out? :confused: :D

--------
Hannibal

[Axlis]

Thanks for the pics Rock! It's smaller than what I thought, but it sure has a hefty looking blade. Thanks again Chad for the design :).

[dialex]

My Dear Daywalker,

So when is the hawkbill version of the SUBCOM coming out? :confused: :D

--------
Hannibal

I don't remember of a hawkbill version, but I've seen a wharncliffe SUBCOM. If I'll get the clearance, I'll post some pics :rolleyes:

[Damage1978]

I finally found somewhere that sells them in the UK :D , just have to wait till after christmas to get one :mad: .

It's a great looking design and I've been looking for a small EDC.
Well done Chad.http://vidahost.com/smilies/otn/realhappy/bigok.gif

[Senate]

I'm definitely getting one when it's available at a larger scale... :cool:

[vampyrewolf]

Early, SHARP Christmas :D

Got mine today from Chad... Think it's the fastest anything has gotten up here from him so far. It's pushed the lil temp out of front/right for today at least, most likely end up as a permanent watch pocket carry after I tweak the tension on the clip.

Doesn't look sharp, no burr so it doesn't feel extremely sharp, but damn does it pop hair :eek: can't wait to see what a couple strokes freehand will do to it.

[deeker]

Cool little knife. Well done, Daywalker. I think I might have to obtain one of these!

Can someone give the dimensions of it, just to get an idea of the size. The pics beside the Cricket (I think) are helpful, but how about thickness, too.

[JD Spydo]

That is one cool little blade. I'll bet that knife has an immense amount of uses :cool: . Well I could only expect a quality design from a quality guy :cool: :spyder: A++++

[vampyrewolf]

damn sharp hungry little bastard :eek: bit me last night already.

I can at least tell you that with practice you can use it with either hand just as easily. :eek:

Just keep in mind that if you have it tip down, clipping it to your belt(I clipped front/left where it would lie if I was going iwb) results in the blade opening a little... and then brushing your hand by it to draw results in a nicely bleeding wound. :eek: :o :D

12hrs later my index is still slightly tender.

nicely done Chad :p I haven't been bit by a toy in a long time.

[DAYWALKER]

ALoha VW,

DUDE...be SURE the blade is housed when carrying IWB!!! Due to the size of the stud, it may have opened a bit. I have learned this lesson of "tip down check" when my BM Stryker blazed a path through my RFP! :eek: Any closer...well, we need not go there, and I am glad the Stryker didn't either! :eek:

Be careful playing Terminator Bunny! :p

God bless and Happy Holidays. :cool:

[ghostrider]

Just keep in mind that if you have it tip down, clipping it to your belt(I clipped front/left where it would lie if I was going iwb) results in the blade opening a little... and then brushing your hand by it to draw results in a nicely bleeding wound. :eek: :o :D


With a little practice, it can open like a "waved" knife. Fun. :D

[pjrocco]

With a little practice, it can open like a "waved" knife. Fun. :D

Yeah... I did that by accident, almost took my finger off. :eek:

So it goes clipless in my back pocket now... But I'm waiting to get stabbed in the ass.. :o (By the knife) :p :)

[DAYWALKER]

With a little practice, it can open like a "waved" knife. Fun. :D

Aloha ghostrider!

Oh there went the "secret technique"!!! :p Careful though, it takes it's toll on the pockets waving it... :o

God bless and happy Holidays :)

[DAYWALKER]

Yeah... I did that by accident, almost took my finger off. :eek:

So it goes clipless in my back pocket now... But I'm waiting to get stabbed in the ass.. :o (By the knife) :p :)

:eek: Not what I needed to hear Rock! Er...tighten pivot maybe? :confused: :D Be advised, God meant for butt lines to run vertically...don't turn it into a "+"!!! :D

God bless and Happy Holidays :)

[WORKER#9]

Yeah... I did that by accident, almost took my finger off. :eek:

So it goes clipless in my back pocket now... But I'm waiting to get stabbed in the ass.. :o (By the knife) :p :)

LOL!!!! :eek: :p :eek: :p

[jaislandboy]

Found a cool link for the Subcom....nice picture there Chad!:http://www.knifecenter.com/kc_new/store_detail.html?s=BO589 :cool:

[224477]

Guys, yesterday I just so entered following words in the Gooogle:
Boker Magnum Subcom
and I stayed like :eek: !
Chad, bro you´re like a star now! I am very happy that I can say: " Yeah, I know that guy, once time back he was a CO..!"
I just cant wait for your :spyder:

[DAYWALKER]

Guys, yesterday I just so entered following words in the Gooogle:
Boker Magnum Subcom
and I stayed like :eek: !
Chad, bro you´re like a star now! I am very happy that I can say: " Yeah, I know that guy, once time back he was a CO..!"
I just cant wait for your :spyder:

Aloha priatel,

No way...FAR from being a star. However, I would like this to be the beginning of something better than the job I have now! ;) Oh, and yeah man...I cannot wait for my :spyder: model to hit production either. It's gonna be awesome, and I am pretty sure you guys will like it. ;) I hope! :rolleyes:

Jaislandboy: Thanks for the link!

God bless you guys and Happy Holidays! :cool:

[Wali]

Congrads Chad!
I saw this on knife center's main page a little while back and thought it was a neat lil folder :D I just found out on USN that it is our very own Daywalker's design. I just ordered it from knifecenter and should have it tomorrow-they are 30 mins from the house. I would have gone down on my lunch hour ,but they don't allow walk ins any longer :( I cannot wait to check this baby out :p I will let you know when I get it.Congrads Chad! :)

[thenick]

Whoa a Chad designed knife. I gotta order one :D

Not expensive at all. Would prefer to get it from NGK because they tighten the pivot pin.

[pjrocco]

Congrads Chad!
I saw this on knife center's main page a little while back and thought it was a neat lil folder :D I just found out on USN that it is our very own Daywalker's design. I just ordered it from knifecenter and should have it tomorrow-they are 30 mins from the house. I would have gone down on my lunch hour ,but they don't allow walk ins any longer :( I cannot wait to check this baby out :p I will let you know when I get it.Congrads Chad! :)

Your going to love it my friend.. Although, warning.. She likes to bit. :) Or maybe it is just me. :rolleyes:

I have beat the crap out of mine on purpose and it has held it's own. I'm very impressed. Make sure to let us know your thought when you get your hands on it. :)

[Wali]

Howdy Gang!
I just opened the box-COOL!!!!! :D I love the ergos and solid construction of this little beast. I will be putting it through its' paces and getting back to you all soon.
Great design Chad-and great execution of your design. :)

[sonOraven]

SWEEEET!!!!!!!!!!! I need to buy me one, Awesome design Daywalker!!!

GODBLESS
-Erik-

[spyderknut]

Even got a picture of it in Blade "what's new" section. :cool: I need at least 2 of these.

[224477]

I got one since yesterday. I guess I am the only one in my country who has it LOL!
I am really not very sure that our shops gonna carry them.
I love it. Very sheeple friendly, people smile when you show it. Good ergos, nice fit n finish. This is a knife you can carry all the time without knowing you got it. Its gonna be part of my EDC. Thanks CLB!!!;)

[deeker]

Mine's on back order. :( Looking forward to getting it in-hand! Reading the reviews and hearing that others have what I have coming just builds the anticipation.

[pjrocco]

Mine's on back order. :( Looking forward to getting it in-hand! Reading the reviews and hearing that others have what I have coming just builds the anticipation.

That sucks that it is on backorder, but then again.. It is a good thing. If the Subcom is on backorder, then people are buying them up. Good for our buddie Daywalker. ;)

[DAYWALKER]

Cool little knife. Well done, Daywalker. I think I might have to obtain one of these!

Can someone give the dimensions of it, just to get an idea of the size. The pics beside the Cricket (I think) are helpful, but how about thickness, too.

Aloha deeker,

Cripes, sorry for missing this. Anyway, here are some measurements:

handle thickness: 7mm
Width from scale top to scale bottom, knife closed: 37.46mm
closed length: 69.14mm
opened length: 117.84mm

Again, my apologies...hope this helped. :o

God bless and mahalo ;) !

[DAYWALKER]

Howdy Gang!
I just opened the box-COOL!!!!! :D I love the ergos and solid construction of this little beast. I will be putting it through its' paces and getting back to you all soon.
Great design Chad-and great execution of your design. :)

Aloha Wali!

Thank you buddy. Ah, it's a good beater knife for sure! Mine has been riding shotgun to my Persian since they hit production. I'm amazed in that you were able to find one! Odd in that some places advetise them, yet don't have them in stock? :confused: :D

Now...let's all have a group prayer regarding my :spyder: Design!!! ;)

Mahalo much and God bless! :cool:

[DAYWALKER]

Your going to love it my friend.. Although, warning.. She likes to bit. :) Or maybe it is just me. :rolleyes:

I have beat the crap out of mine on purpose and it has held it's own. I'm very impressed. Make sure to let us know your thought when you get your hands on it. :)

Aloha Rock!

:p It's just you...and Vampyrewolf. :p :rolleyes:

Thanks though, for beating the daylights outta your SF...just be nice to my :spyder: design when it's born okay? God willing, I hope it's soon that I see pics of my :spyder: wearing the "033"! ;)

God bless and take care! :cool:

[DAYWALKER]

SWEEEET!!!!!!!!!!! I need to buy me one, Awesome design Daywalker!!!

GODBLESS
-Erik-

Mahalo sonOraven,

Thanks for the kind words...Just race dad for one! However, if you lose...ya gotta shine his spokes until he can see himself in 'em! :p Kidding!

God bless and pedal hard! ;)

[DAYWALKER]

Even got a picture of it in Blade "what's new" section. :cool: I need at least 2 of these.

Aloha myontimefriendomine!

Sorry so late. :o Yeah, fortunately I got not only a copy of the BLADE but a cool arse skull fob from JSmith as well!

Thanks for your kind words bro...however, instead of two of those, buy ONE of my :spyder: 's...er, when they come out of course. :p :D

Take care and God bless! :cool:

[spyderknut]

Aloha myontimefriendomine!

Sorry so late. :o Yeah, fortunately I got not only a copy of the BLADE but a cool arse skull fob from JSmith as well!

Thanks for your kind words bro...however, instead of two of those, buy ONE of my :spyder: 's...er, when they come out of course. :p :D

Take care and God bless! :cool:

Bud, I have 3 Adventuras. I can't very well buy fewer of yours. ;)

[DAYWALKER]

I got one since yesterday. I guess I am the only one in my country who has it LOL!
I am really not very sure that our shops gonna carry them.
I love it. Very sheeple friendly, people smile when you show it. Good ergos, nice fit n finish. This is a knife you can carry all the time without knowing you got it. Its gonna be part of my EDC. Thanks CLB!!!;)

Ahoj priatel,

Yep...you are the only one in "your country" that has one! ;) Mahalo for your kind words also, and I do apologize for the right hand only clip. :o

Boh ti zehnaj bro! :cool:

[CopilotATS-55]

i gotta find a dealer nearby :rolleyes:

[DAYWALKER]

That sucks that it is on backorder, but then again.. It is a good thing. If the Subcom is on backorder, then people are buying them up. Good for our buddie Daywalker. ;)

Aloha Rock,

No...from what I have gathered, sometimes "backorder" simply is used to see just how many people express an interest in a knife. :( However...


I like YOUR interpretation better! :D I told The Deacon this once...it'd have been "funny" to have called Boker and said, "Hey, I just celebrated my SF by picking up a Spyderco Kiwi!...Hello?...Hello?" :p Just kidding!

God bless :cool:

[jbake]

Well, I'm late to the party - as usual...

It's a great little knife. It was my primary "gift opener" on Christmas morning and it got quite a workout. (Anybody else notice that they package kid's toys today like they were going to airdrop them? "Back in my day", they just tossed a bunch of stuff loose in a box.)

We remodeled our offices at work as well, and it's seen a lot of use there as we were packing / unpacking our stuff. A lot of folks borrowed it there and everyone seemed to like it. Best of all, nobody gave me those nervous looks like they do when I pull out something like a Chinook :o

Congrats again Chad.

-jb

[stonyman]

Congrats Daywalker on a great functional knife. It seems as though it fits the bill of utility/self-defense/political correct knife all in one. I have to get at least two. It would be a good travel knife where strict strick knife laws are.

[spydutch]

I really like mine.

Amazingly sharp moneyclip.

Mahalo Chad ;)