which discontinued spydie you'll miss the most?

[sam the man..]

Sayonara C-01!! *sob!* Think I'll miss this 'lil spydie the most!! Followed by those Micarta Calypsos!! *sniff!* and not to mention ~ the plain-edged Standard!! *bwaa-haa!*



Sam



have spydies

will travel...

[purple95]

Ditto the Standard!!

The G10 scales, thick blade, and steel liner made it one of the best, well-built knives in the line. Rock solid.

I have and regularly use both a plain edge and a serrated. The latter is the serrated member of my every day carry trio (Sm Sebenza and Victorinox Soldier).

dan

[sam the man..]

Hello Purple 95! Welcome aboard! <img src="smile.gif" width=15 height=15 align=middle> I saw a serrated Standard at the SFO! Really awesome piece.. Think some plain-edged ones are still being circulated around... <img src="smile.gif" width=15 height=15 align=middle>

Sam

[Blades]

The Pegasus and Calypso.


Blades

[afee]

Hey guys. I did a search, but can't seem to find which models are being cut. Is it here, or possibly over at BF or KF?

Also, the old site had a section to purchase discontinued models from. Not the case here. Have I just not found it, or does the site not have one?

Last q, with the new Lum in G-10, are they keeping the Ti version? I hope so, as I have been saving up for that one for a bit now.

Thanks, E

[cutler34]

The &quot;R&quot; .We didn't even get to see them Downunder.


Regards
Ricki
info@outdooredge.com.au
Spyderco Club Member

[shootist16]

I'll always miss the Wegner jr <img src="sad.gif" width=15 height=15 align=middle>

Dennis Bible

[sam the man..]

*sob!* The Ti-Lum tanto is making its exit too!! *bwa-haaaa...* <img src="sad.gif" width=15 height=15 align=middle>

Sam

have spydies
will travel...

[FullerH]

I think that I miss the C-19 Terzuola Jr. Clipits most. I have mine, an early one with aluminum scales, but I really love it and wish that it were still available for others to buy. Of course, if Spyderco were to offer a sub-3&quot; version of the StarMate, I would be one of the first in line to buy one and be just as happy as a pig in clover, as I have repeatedly said over on BladeForums how much I love my StarMate, but that I am constrained by Washington, DC law to carry a sub-3&quot; blade where I work. Oh, but I can dream.

Walk in the Light,
Hugh Fuller

[dsvirsky]

I just found out that the Centofante models (C25 &amp; C50) have been discontinued. How did I miss that news???

Dave

[sam the man..]

Ummm, the C25 is a nippy 'lil blade.. I picked up a numbered one with a gold bug inlay in Arizona recently.. <img src="smile.gif" width=15 height=15 align=middle> You dudes should check out the &quot;Vesuvius!* its Awesome!!

Sam

have spydies
will travel...

[Joyce Laituri]

Samo,

Need a tissue buddy? RLOL

Joyce

[sam the man..]

Hello Joyce!! The local drugstore had ran out of soft facial tissues! *hee-hee!* You guys really got me cryin' and weepin' over those cute critters.. *sob!* <img src="sad.gif" width=15 height=15 align=middle>

Sam

have spydies
will travel...

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[mr. murder]

I'm gonna miss the Stainless Steel Rescue the most by far, then the Stainless Worker.

heres some tissues for ya sammo.
Puffs (with aloe) for that red, sore, spydie missing nose of yours. <img src="smile.gif" width=15 height=15 align=middle>

[sam the man..]

whoah!! multiple whammy posts!! welcome aboard mr.murder! <img src="smile.gif" width=15 height=15 align=middle> Whatta name to it!! <img src="smile.gif" width=15 height=15 align=middle>

Thanks for the tissue offer.. I can't get enough.. now that the Centofante IIs are gone as well.. *sob!*

Sam

have spydies
will travel...

[Guyon]

Wegner Jr. and Standard. Boo hoo. Sniff.

[sam the man..]

standard? *aaaargh!* *Bwaaaa-haaa!*, I'm gonna miss that one too!! *sniff~~* <img src="sad.gif" width=15 height=15 align=middle>

Sam

have spydies
will travel...

[stjames]

Wenger Jr. I have one in for repair and don't know if I'll see another.

[Clay Kesting]

I'll miss the Centofantes, particularly the Jr. I find the thin Wharncliffe style blade is very useful for my daily tasks such as cutting out clippings, peeling fruit, removing splinters and sharpening pencils.

[BigRich]

Did I see correctly?...the Wegners are being discontinued??? and I suppose all of the Goddards are gone?...GRRRRRR!!!!

[BigRich]

I have one of the micarta-Wayne Goddards, and I think it has to be one of the best looking blade designs Spyderco has ever produced! Got to admit most of those big holes make it hard to streamline a blade...so even though Goddards are fairly large,it is very flat and a good looking blade as well as very serviceable!

[BigRich]

I had to replace my very old Endura this past summer as I lost it white water rafting at Glacier national park,I never went anywhere without that blade...just glad it didn't open on the way down!Sure do miss that old knife!

[sam the man..]

Not really dude ~ Only the Wegner Jr... *bwa-haa!*<img src="sad.gif" width=15 height=15 align=middle>


have spydies
will travel...

[br44]

I'm going to miss the Peter Herbst. It is the smoothest of all!

[toothed]

treb, I agree with you. At another forum I posted that it will be unfortunate that there will be a number of Spyderco fans both longtime and new who will not have the experience of handling the &quot;original&quot; Peter Herbst. Both you and I know how smooth that knife cycles--I guess we're among the lucky few.

[earthworm]

!WHAT! No tears for the Q-Knife?!?!? The weight,size,blade shape,edges &amp; of course those skeltonized handles &amp; blades with their'cute'patterns made them a hit with my crew!I collected them for my sons &amp; gifted a few:the consistant reply was&quot;Where can I get one!?!?&quot; Come on;Bring 'Em Back!!!

[sam the man..]

Bye &quot;Q&quot; &amp; &quot;R&quot;... They are collectible items now!

Sam

have spydies
will travel...

[Knife Knut]

I will miss the G-10 Flat ground Serrated Police.

I wish they would do one last run of it in VG-10

Knife Knut on a shoestring budget.

[rico]

I agree with ffuller c19 Terzoula Jr. rr

[Hoosierdaddy]

Earthworm,

Thanks to a tip from Sharp1... I just got a &quot;Q&quot; H&amp;K for 55.00 from this site (see below) Since you're &quot;into&quot; guns this might be desirable to you.
Also got an &quot;R&quot; from johnfjensen for 96.00 both great knives!

http://www.ndsproducts.com/spyderco.html

[sam the man..]

Well Hoosierdaddy, someone out there is a &quot;Q-natic!&quot; Seems to be having all them specially made blades for different companies.. <img src="wink.gif" width=15 height=15 align=middle>

Sam

have spydies will travel

[shootist16]

The Wegner is the knife I will miss the most. It was the perfect folder for me. <img src="sad.gif" width=15 height=15 align=middle>

Dennis Bible www.theleadingedgeonline.com

[sam the man..]

Sheesh! This post is almost 2-years old! <img src="tongue.gif" width=15 height=15 align=middle>

Sam

have spydies will travel

[Hoosierdaddy]

Samo,

I sure would like to collect all the variations of the &quot;Q&quot;. I have a standard S/E and the new (to me) H&amp;K S/E. I saw on e-bay a Flag &quot;Q&quot; that would be cool to own, especially now! I didn't see what it finally sold for... does anyone know?
My H&amp;K &quot;Q&quot; I purchased from a tip from Sharp1 (thanks very much) at a great price, 55.00 NIB
The &quot;R&quot; is a bitchen knife too, I got one in P/E. I guess any Spydie's a great knife <img src="wink.gif" width=15 height=15 align=middle>

[Dorkasaurus]

I dont know how, but on friday (jan 18) i went to the local Cutting Edge Cutlery store
(www.swords.ca) and right after i walked in i saw it, THE &quot;Q&quot;. It was 67 CANADIAN dollars onse taxes were added onto it So..., i purchased the last one in the store, this is my first spyderco knife - IS THIS A GOOD BUY???

I Cant Think Of Anything Smart Or Intelligent To Say So. I Will Say This

[chinook]

That is a great price on a fun knife.....

Now about your nym.... &gt;&lt;g&gt;

Disguised as a responsible adult.

[Dorkasaurus]

Im new to the forum, so i am unsure what
&quot;nym.... &gt;&lt;g&gt;&quot; means, if it has any meaning
Thanks

I Cant Think Of Anything Smart Or Intelligent To Say So. I Will Say This

[chinook]

Welcome to the forum, its a great place to learn and have some fun.

'Nym' is the name(nickname) you go by in here. I found it amusing and indicated that by the &gt;&lt;g&gt; (the 'g' stands for grin)



Disguised as a responsible adult.

[ruxton]

micarta calypso jrs, and the Qs and Rs, still haven't seen one in real life. anyone wanna sell me a NIB &quot;R&quot; for a relatively cheap price? PE preferably but SE at a good price. e-mail me offers. don't be offended if i don't reply tho, i check my mail spasmodically at best
MAT

[sam the man..]

Dude ~ Check out johnfjensen's, there's a NIB R for grabs! <img src="wink.gif" width=15 height=15 align=middle>

Sam

have spydies will travel

[Dorkasaurus]

Thanks

P.S sorry about the late reply

I Cant Think Of Anything Smart Or Intelligent To Say So. I Will Say This

[revolvergeek]

The C48 Tim Wegner; used one for my big EDC for about 2 years now.

I read something about a 'new' version with something inset into the handles the other day.

Has it completely been dropped or is there a new version coming out or was I just sitting up too late playing on the computer????

[sam the man..]

Dude ~ Its the lynx.. Cute knife! I miss the Wegner Jr.. <img src="sad.gif" width=15 height=15 align=middle>

Sam

have spydies will travel

[revolvergeek]

Thanks Sam! Just did a quick search of the forum for the Lynx. That looks very cool, kind of in between the size of the C48 and the C49, right? That could be nearly perfect for EDC.

Guess that I will need budget for one or two of those now too.

Sigh... I wish that I was going to the SHOT show this year!!!!!

[nomaded]

It's not the Lynx, it's the Ocelot!

I'm looking forward to the release of this knife.

[liko]

The Calypso Jr. I just got one in for use as a PE knife that wouldn't be as intimidating to people I was working around. I'd prefer a deeper choil if it's gonna have one, but it's a great little knife. I guess the Native is supposed to take over the Calypso's role as an ergonomic mid-sized knife.

[nomaded]

Actually, I think the Salsa will be replacing the Calypso Jr. as the medium-sized ergo knife. Sure, the Salsa is a bit more expensive, but I think the additional cost is worth it.

[Franco G]

I second the shootist16: the Wegner jr.
Regards,

Franco

[revolvergeek]

Samo, did you know that Jensen still has some serial numbered Wegner Jr.s on his website? Might have to hurt my credit card and pick up a spare :-D