Im on the fence....undecided
-
- Member
- Posts: 608
- Joined: Sun Apr 14, 2019 7:56 pm
Im on the fence....undecided
So there is a few upcoming pm2 releases I am contemplating getting. Im undecided on which one and kind of need a push from the community. The ones I am thinking about are:
Smkw exclusive next week - dlc coated M4 carbon fiber
Cruwear and micarta--been waiting for what seems like a year now...
Blade hq exclusive next week- dlc coated REX45 copper
So if you were in the market for a new pm2, what ya gonna get?...
Smkw exclusive next week - dlc coated M4 carbon fiber
Cruwear and micarta--been waiting for what seems like a year now...
Blade hq exclusive next week- dlc coated REX45 copper
So if you were in the market for a new pm2, what ya gonna get?...
-
- Member
- Posts: 539
- Joined: Mon Oct 29, 2018 1:04 am
- Location: Davis, CA
Re: Im on the fence....undecided
I’m not really in the market for a PM2 in general but I’m planning to grab a crucarta one as soon as I can. I’ve been waiting for that treatment on the PM2. That’s your best bet IMHO.
Re: Im on the fence....undecided
the copper version is really heavy, the cruwear isn't out and will be regular production, and M4 is a fantastic steel.
The choice for me would be clear between those options.
The choice for me would be clear between those options.
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: Im on the fence....undecided
If it were me, I’d choose in this order:
Cruwear and micarta
SMKW exclusive
Cruwear and micarta
SMKW exclusive
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
Re: Im on the fence....undecided
Patiently waiting for the Cruwear micarta. Had a pre-order since it became available.
Already have a DLC coated M4. Maybe if the scales were green instead of blue, I would be tempted. I do like M4, but pass on this one.
Too heavy on the cooper version. Although wouldn't mind REX 45 PM2 at some point.
Already have a DLC coated M4. Maybe if the scales were green instead of blue, I would be tempted. I do like M4, but pass on this one.
Too heavy on the cooper version. Although wouldn't mind REX 45 PM2 at some point.
Peter
-
- Member
- Posts: 326
- Joined: Sat Jun 16, 2018 12:56 pm
Re: Im on the fence....undecided
I'll probably try to get the SMKW one. Not sure on the scales but I've been wanting to try M4.
If I didn't already have one with Cruwear, I might get that instead. It's just an amazing steel.
Copper just doesn't do anything for me. If it were brass, or if I liked copper, that would definitely move to the top of my list even though it'll be heavy.
If I didn't already have one with Cruwear, I might get that instead. It's just an amazing steel.
Copper just doesn't do anything for me. If it were brass, or if I liked copper, that would definitely move to the top of my list even though it'll be heavy.
Re: Im on the fence....undecided
I would also choose the M4, pretty different handle scales as well. M4 is a top 3 personal favorite of mine and it doesn't seem to come around all that often anymore besides BHQ exclusives.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: Im on the fence....undecided
Just continue waiting for the crucarta, it's going to be worth the wait.
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Im on the fence....undecided
The PM2 is just not my knife, only have one and it will probably stay that way. But IF... IF I was gonna get one of those 3, the M4 with the Fat Carbon would be my choice.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: Im on the fence....undecided
That would be an easy one for me.Cowboyfromhell wrote: ↑Fri Aug 20, 2021 5:12 pmSmkw exclusive next week - dlc coated M4 carbon fiber
Cruwear and micarta--been waiting for what seems like a year now...
Blade hq exclusive next week- dlc coated REX45 copper
M4/CF? Although I'm ambivalent about carbon fiber I really like M4.
Cruwear/Micarta? As appealing as it sounds, I'm impatient. Vaporware.
REX45/Copper? I like REX45, but the copper scales just seem cumbersome.
Get the M4 now.
Re: Im on the fence....undecided
If I was only going to get one I'd wait it out for the Cruwear Micarta one
Of all the things I've lost I miss my mind the most!
Re: Im on the fence....undecided
I'm going with smkw M4 as I like the scales. Just can't do coated rex 45 with a handle that says patina.
My socks carry tip up MNOSD Member 0021
Re: Im on the fence....undecided
I'm going to be guilty of buying all 3, as it will check off many steels in the pm2 platform for me that I've missed over the years. Lucky for me I do like all of the scale options alot! Back to the point here...crucarta may be hard to track down once it drops but regular production means eventually it can be grabbed. The choice is now smkw or blade hq,both of which the scales can be bought aftermarket and swapped,so you have to think of steel and coating. As far as I know m4 has been released in dlc (blade hq jade) but I'm pretty sure rex45 has not so that alone would lead me to the blade hq exclusive in rex45 of I could only pick one. Bang for the buck may lean heavily on the smkw exclusive tho. Those scales are pricier than the copper ones and comes in cheaper overall. Im sure I didnt help your cause haha I suppose at this point draw one out of a hat and roll with it, as far as I'm concerned these are all...Golden!
I collect them all, and use them all! I use the excuse, "I'm trying to find the perfect one", but in reality, they are all perfect in their own way!
Re: Im on the fence....undecided
Crucarta b/c I dont have any folders with Cruwear, nor micarta. Also supporting great production models vs exclusives when I can makes sense.
Military/PM2/P3 Native Chief/Native GB2 DF2 PITS Chaparral Tasman Salt 2 SE Caribbean Sheepfoot SE SpydieChef Swayback Manix2 Sage 1 SSS Stretch 2 XL G10
-
- Member
- Posts: 152
- Joined: Tue Jan 28, 2020 1:54 pm
- Location: Southern Germany
Re: Im on the fence....undecided
Get the M4 and switch the scales?
- kennethsime
- Member
- Posts: 4787
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Im on the fence....undecided
Crucarta. It is the way.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
-
- Member
- Posts: 608
- Joined: Sun Apr 14, 2019 7:56 pm
Re: Im on the fence....undecided
Has anyone heard any updates or rumors as to when the crucarta pm2 will finally arrive?!
Re: Im on the fence....undecided
Like it others have said: PM2 not really "my" model, especially as long as there is a Stretch, a Manix, a Tenacious S35VN...
But IF: I´d go with Micarta /Cruwear, no doubt. And this more for the handle- than for the blade-material...
But IF: I´d go with Micarta /Cruwear, no doubt. And this more for the handle- than for the blade-material...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)