Only 1 CBN stone - what grit?
-
- Member
- Posts: 92
- Joined: Sat May 06, 2023 9:07 pm
Only 1 CBN stone - what grit?
I need a Diamond / CBN stone for my super steels and want to get a metallic bonded stone. They're expensive so I'd prefer to only buy one. Maaaaaaybe 2 if you sell me on the benefits.
If I to only buy one, what size grit should it be? 400?
A semi coarse edge is fine. Currently have a SM. Only want metallic bonded construction stones. Do not want SM diamond stones (non-bonded is too aggressive)
If I to only buy one, what size grit should it be? 400?
A semi coarse edge is fine. Currently have a SM. Only want metallic bonded construction stones. Do not want SM diamond stones (non-bonded is too aggressive)
Re: Only 1 CBN stone - what grit?
I've seen Sal comment that the 400 grit Sharpmaker CBN stone is sufficient for getting a good edge if you go light with the swipes to finish. Mentioning this just for the grit size; understand you want a bonded stone instead.
viewtopic.php?f=2&t=95038&p=1723588#p1723588
viewtopic.php?f=2&t=95038&p=1723588#p1723588
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Only 1 CBN stone - what grit?
Bite the bullet - get a proper diamond sharpening water stone at 300 or 400 grit and get a 1000 at a later stage. You will be set for life (unless you sharpening is your source of income, in that case it will still last you a few yearas).
There are the godly stones by Shawn, or look at the stones offered by JKI (JapaneseKnifeImports), or - not sure these are being still made - stones by practical sharpening (I have 400 and 2000).
That would be my way to go about this.
There are the godly stones by Shawn, or look at the stones offered by JKI (JapaneseKnifeImports), or - not sure these are being still made - stones by practical sharpening (I have 400 and 2000).
That would be my way to go about this.
... I like weird ...
- Brock O Lee
- Member
- Posts: 3381
- Joined: Thu Jul 21, 2011 3:34 am
- Location: Victoria, Australia
Re: Only 1 CBN stone - what grit?
300-400 IMO
If you want to expand later you could get something coarser (150), or something finer (1000)
If you want to expand later you could get something coarser (150), or something finer (1000)
Hans
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Favourite Spydies: Military, PM2, Shaman, UKPK
Others: Victorinox Pioneer, CRK L Sebenza 31, CRK L Inkosi
Re: Only 1 CBN stone - what grit?
400 gives an excellent all-purpose edge. I carry a 180 diamond plate for reestablishing an apex on sorely neglected kitchen cutlery and a 400/800 CBN for refining the edge. I seldom use the 800 side, as 400 gives a more durable edge for kitchen work. (Cuts well for longer before needing service) I also carry a Sharpmaker with brown and CBN rods for serrated blades. On a recent road trip I sharpened the kitchen knives at all 6 houses where we stayed as guests.
- standy99
- Member
- Posts: 2223
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: Only 1 CBN stone - what grit?
Trash cheap stones getting to a 600 CBN, as a butcher for years it’s the 600 that you want as your best stone.
Cheap stones shaping, expensive stones sharpening…
Cheap stones shaping, expensive stones sharpening…
Im a vegetarian as technically cows are made of grass and water.
-
- Member
- Posts: 48
- Joined: Sun Nov 08, 2020 4:26 pm
Re: Only 1 CBN stone - what grit?
Spyderco’s CBN bench stone is dual-sided 400/800.
-
- Member
- Posts: 6
- Joined: Thu Jun 22, 2023 1:06 am
Re: Only 1 CBN stone - what grit?
Does anyone know a good pocket cbn stone? (Besides the double trouble)
- dull&blunt
- Member
- Posts: 123
- Joined: Thu Mar 02, 2023 8:37 am
- Location: not too sharp nor pointy
Re: Only 1 CBN stone - what grit?
I agree with this guy. National Knives has this stone for $98, about $5 cheaper than other places. I just got one myself.Rusty_Shackelford wrote: ↑Tue Jun 20, 2023 1:26 pmSpyderco’s CBN bench stone is dual-sided 400/800.
Re: Only 1 CBN stone - what grit?
Double "Stuff"Nil Sine Numine wrote: ↑Thu Jun 22, 2023 3:46 pmDoes anyone know a good pocket cbn stone? (Besides the double trouble)